1.0 (mise en place d'une pseudo liaison de composants( sert d'exemple)

composants/main.py

@@ -0,0 +1,81 @@
+import time
+from machine import I2C, Pin, PWM, ADC
+import utime
+
+
+
+
+pwm = PWM(Pin(32), freq=50)
+
+led_verte = Pin(12, Pin.OUT)
+led_verte_luminosite = Pin(25, Pin.OUT)
+led_rouge = Pin(13, Pin.OUT)
+led_bleue = Pin(14, Pin.OUT)
+led_rouge_gas = Pin(10, Pin.OUT)
+
+pir_sensor = Pin(33, Pin.IN)
+gas_sensor = Pin(34, Pin.IN)
+ldr_sensor_pin = 35
+
+adc = ADC(Pin(ldr_sensor_pin))
+adc.width(ADC.WIDTH_10BIT)
+adc.atten(ADC.ATTN_11DB)
+
+buzzer_pin = 11
+
+buzzer = PWM(Pin(buzzer_pin), freq=440, duty=0)
+
+def activate_alarm():
+    for _ in range(3):
+        buzzer.duty(512)
+        utime.sleep(0.5)
+        buzzer.duty(0)
+        utime.sleep(0.5)
+
+def checkPin(guess):
+    if guess == secret_pin:
+        display_message("Code correct")
+        led_verte.on()
+        pwm.duty(120)
+        utime.sleep(2)
+        pwm.duty(75)
+        led_verte.off()
+    else:
+        display_message("Code incorrect")
+        led_rouge.on()
+        activate_alarm()
+        utime.sleep(2)
+        led_rouge.off()
+
+def display_message(message):
+    oled.fill(0)
+    hidden_secret = '*' * len(guess)
+    oled.text(hidden_secret, 0, 0)
+    oled.show()
+    utime.sleep(1)
+    oled.fill(0)
+    oled.text(message, 0, 0)
+    oled.show()
+
+def pir_detection():
+    while True:
+        if pir_sensor.value() == 1:
+            led_bleue.on()
+            utime.sleep(3)
+            led_bleue.off()
+        utime.sleep(0.1)
+
+
+def luminosite_detection():
+    while True:
+        luminosite = adc.read()
+        print (luminosite)
+        if luminosite > 300:
+            led_verte_luminosite.on()
+        else:
+            led_verte_luminosite.off()
+        utime.sleep(0.5)
+
+import _thread
+_thread.start_new_thread(pir_detection, ())
+_thread.start_new_thread(luminosite_detection, ())